Attaching a hair clip or elastic to one of our faux leather bows or glitter bows might be easier then you think.
To attach hair clip or elastic to bow you will need
one faux leather bow
A paper clip if you are using elastic.
If you are using a lined hair clip open the clip and slide the clip under the loop at the back of the bow. Then add a dab of hot glue to the back of the bow in front of the clilp.
Now if you want to use elastic I recommend the 9mm elastic. Cut the elastic to the length you need don’t glue the ends. Feed one end of the elastic through the paper clip then feed the paper clip under the bow the same as you do with a hair clip.
Make sure the shiny side is facing the correct way before your feed the elastic through. Now pull the elastic until your short end comes through. Then glue the ends of your elastic together. Feed the elastic back so the join will be at the back of your bow and glue to the back of the bow so it will not more and you will not see the join.
I thought I would try my hand at a video tutorial. Must say I wasn’t to keen but anyway if you would like to check it out here it is.
If you like this post please share back to this page or pin for later.