Make a triple layer rosette flower with satin ribbon

Make a triple layer rosette flower with satin ribbon

Make this triple layer rosette flower using satin ribbon.

Make a triple layer rosette flower with satin ribbon 

You will need

16mm double sided satin ribbon

Hot glue

2 felt circles

Rhinestone button with shank removed.

Cut your 16mm double sided satin ribbon into 8cm lengths.

You will need

8 lengths for the centre layer

10 lengths for the middle layer

11 lengths for the bottom layer.

I did not seal the ends of the ribbon as they will be glued and covered with felt.

I used Plum, Raw silk and Ivory satin ribbon for this flower.

 

Make a triple layer rosette flower with satin ribbon 

 

To show you how to fold the ribbon I am using a length of printed ribbon so you can see both sides easily.

First fold your ribbon in half.

Make a triple layer rosette flower with satin ribbon 

 

Once fold in half tuck the top ribbon behind and glue in place.

 

Make a triple layer rosette flower with satin ribbon 

 

Fold and glue all your ribbon lengths this way.

 

 

 

Once you have glued all your ribbon lengths. Use 1 felt circle as a guide to make a ribbon circle.  Glue down your first 4 petals to make a cross.

  

 

Than fill in the spaces with the remaining petals to make your first layer.

 

  

Place your second layer under so it just sits out a little and glue down.

Start in one spot and work your way around the flower and until your have completed the circle. 

 

Make a triple layer rosette flower with satin ribbon  

 

You can do the first four petals first to create a cross and fill in the spaces to make sure it stays evenly spaced.

 

Make a triple layer rosette flower with satin ribbon     

 

Repeat with your final layer.

 

  

 

Make sure your final layer sits out a little for the previous layer.  Flower looks a different colour due to the lighting when I took the photo.  This is the bottom side of the flower.

 

  

 

Once you have completed the final layer of your flower you can glue a felt circle to the back of your flower.  Glue your rhinestone button to the centre of your flower.

 

make a triple layer rosette flower with satin ribbon 

 

You have now completed your flower.  

Thank you for taking the time to read my instructions, I hope your found them helpful.  If you would like to share these instructions please use 1 photo only and share a link back to this page.

 

Need satin ribbon to make your wonderful ribbon flower creation we have a large selection of colous and widths at Think Bowtique. 

 

Buy Satin ribbon in Australia

Back to blog